Precast Wall Removal

Pasadena, Texas
The plan to upgrade a neighborhood HEB grocery to a Super HEB in Pasadena, Texas called for several tilt wall panels to be removed and demolished.

The concrete panels were 7½ inches thick and ranged from 25 to 35 feet in height. Work had to be completed overnight, so that the store could maintain normal business hours and remain open to local shoppers.

Between 11:00 p.m. and 5:00 a.m each night, highly trained ATI technicians pulled down 4 to 5 panels weighing nearly 30,000 pounds each. In total, over 250 feet of wall space was safely disassembled. The panels were then broken into smaller pieces and hauled away.

Simultaneously, workers inside the building used electric saws to cut and remove concrete in areas of the store where new expansion was planned. Interior concrete cutting work required extraordinary precision to accommodate MEP (mechanical, electrical, plumbing) utilities.

Once again, Aggregate Technologies, Inc. has completed a challenging concrete removal assignment on time and without incident – despite logistical constraints and a rigid timeline.

Aggregate Technologies is experienced in concrete sawing and demolition and is your reliable partner for any concrete cutting job in the continental United States.

Project Gallery

Image
Image

    More Wall Sawing Projects

    concrete-bridge-demolition

    Hurricane Harvey Emergency Bridge Repair — Humble, Texas

    After water levels subsided the cleanup efforts began and life returned to normal, it was time to inspect the infrastructure and bridges in the area for any potential damage caused by the flooding.
    Image

    Underwater Hydrodemolition — San Jacinto River, Texas

    Torrential rain over Texas from Tropical Storm Imelda flooded the San Jacinto River. Between 11 and 14 barges came unmoored, and some collided with the Interstate 10 bridge.
    Image

    Structural Slab Removal at Rice University — Houston, Texas

    Aggregate Technologies, Inc. was recently contracted for a job at Rice University in Houston to remove a second floor structural slab for a new stairwell.
    Image

    Structural Beam Removal Using Hydrodemolition — Texas

    Removing concrete from structural beams (while also saving the rebar) can take a lot of time, and time was of the essence.
    Image

    Precast Wall Removal — Pasadena, Texas

    The plan to upgrade a neighborhood HEB grocery to a Super HEB in Pasadena, Texas called for several tilt wall panels to be removed and demolished.
    Image

    Cutting and Removing 150 Piles a Day — Port Arthur, Texas

    In addition to traditional methods of pile sawing and cutting, we use our patented pile cutting machine (pictured below) when necessary to maximize safety while keeping your project on time and on budget.

    Parking Garage Demolition — Houston, Texas

    ATI’s structural demolition expertise and skill was put on display after the fifth floor of a five-story parking garage partially collapsed on June in Houston, Texas.
    Image

    Interior Structural Demolition — Houston, Texas

    ATI operators completed interior structural demolition work at Baptist Temple Church in the historic Heights neighborhood in Houston, Texas.
    Image

    Hydrodemolition of Bridge Deck — Gulf Coast Region

    We were was called in to remove the top 1″ to 3″ of concrete over a 16,000 square foot area.
    Image

    Houston Intercontinental Airport Runway Removal — Houston, Texas

    A recent project for Aggregate Technologies involved sawing and removing of thousands of square feet of runway concrete at the Houston Intercontinental Airport (IAH).

    Contact us when you need a contractor with a record of safety and success for your Wall Sawing needs.
    1-877-SLABSAW

    Contact Us For a Quote